TENNESSEE TECHNOLOGY CENTER @ MEMPHIS

AVIATION DIVISION

REQUIRED STUDENT HAND TOOLS

FILE

10”          Mill Files

 8”           Half-round bastard file

 8”           Round bastard file

                File handle

PUNCHES/CHISEL

3/8”         Center punch

3/32”       Pin Punch

5/32”       Pin Punch

1/8”         Pin Punch

5/32”       Taper Punch

3/16”       Taper Punch

                Brass drift pin

3/4”         Chisel

HAMMERS

 8 oz        Ball-pein hammer

16 oz       Ball-pein hammer

 6 oz        Plastic-tip hammer

PLIERS/CUTTERS/SNIPS/SAWS

                Standard hacksaw, with blades (24 to 32 teeth per inch)

                Crimping and stripping tool (electrical)

 6”           Diagonal Cutting pliers

 6”           Needle nose pliers

 6”           End cutters

10”          Channel lock pliers

                Safety wire pliers

                Duck-bill pliers

 8”           Vice grip pliers

                Compound Leverage snips: 1 right cut, 1 left cut, 1 straight cut

WRENCHES/SOCKETS/RATCHETS

10”          Adjustable wrench

 6”           Adjustable wrench

1/4”         Socket set with ratchet

1/4”         Drive universal 12 point sockets

3/8”         Drive speed handle

3/8”         Drive deepwell 12 point sockets – 3/8” through 1”

3/8”         Drive adapter, apex

3/8”         Drive standard 12 point sockets – through 1”

3/8”         Drive ratchet/extensions

3/8”         Through 1” angle head open end wrenches

1/4”         Through 1” combination wrenches

1              Allen wrench set to include short arm 1/16” through 9/64” & long arm 7/64” through 5/16”

SCREW DRIVERS

4”            (small) Screw driver standard (flat blade)

6”            (medium) screw driver standard (flat blade)

8”            (large) screw driver standard (flat blade)

3”            (small)  #1 Phillips screw driver

4”            (medium) #2 Phillips screw driver

6”            (large) #3 Phillips screw driver

MEASUREMENT/MARKING TOOLS

1              Feeler Gauge (.005 - .035) Narrow Blade

                Combination Square (12” blade)

6”            Scale

6”            Dividers

6”            Standard Dial Caliper

                Machinist Double Point Scriber (adjustable sleeve)

                Multi-meter

SAFETY/INSPECTION/TOOL CABINET

1 Pr.        Safety Glasses

1 Pr.        Welding Goggle (#5 Filter lens)

                Magnetic Pick-up Tool

                Mechanic fingers

1              Flexible inspection mirror (approx. 2” x 3” mirror)

                Protective paint mask (disposable or replacement type)

1              2-cell flashlight

                TOOL CABINET/BOX